Casablanca Hanover Manuel du propriétaire télécharger pdf (Page 5)

HANOVER

™

NOTE:  is step is required only under two conditions: If

the fan weighs 36 lbs. or more (which does not pertain to

this fan) or if the existing ceiling ﬁ xture outlet box needs

to be modiﬁ ed for a ceiling fan application (for example,

if the house is not new construction and you are replacing

an existing light ﬁ xture). We recommend that the ceiling

box be of suﬃ cient capacity to support the weight of the

fan and light ﬁ xture under any conditions. If in doubt

whether you need to install the lag screw, consult a qualiﬁ ed

electrician.

Step 2 (optional). With the large washer attached, pass the

lag screw (Pack A) through the center hole of the crossbar

mounting bracket and screw into guide hole. Tighten until

outlet box is mounted ﬁ rmly to beam.  is box must be

secured to the ceiling ﬁ rmly.

Step 3. Attach the canopy to the crossbar mounting bracket

with three of the 8-32 x 2

" long canopy screws (Pack

B) and lock washers provided with your Casablanca fan.

Tighten using the provided screwdriver until snug against

the ceiling.

NOTE: On sloped ceilings, align the canopy opening with

the top or peak of the room.

CANOPY HARDWARE (not to scale)

Canopy

Canopy Hatch

Pack B:

Canopy Screws and

Lock Washers (5)

Feed outlet box

wires through

canopy opening

Canopy

Lock Washer

Canopy Screw

LAG SCREW INSTALLATION (OPTIONAL)

CANOPY INSTALLATION

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Casablanca Hanover Manuel du propriétaire Page 5