Casablanca WHITMAN Manuel du propriétaire télécharger pdf (Page 10)

LIGHT FIXTURE INSTALLATION

HARDWARE (not to scale)

Light Fixture

Light Cover Board &

Bottom Finial

Light Fixture Screws (3)

Figure #1

Figure #2

Light Assembly Installation

Step 13a. Locate the light cover board and unscrew

the ﬁ nial from the threaded rod. Set ﬁ nial aside for

glass installation in Step 14.

Step 13b. Locate the three screws on the light

kit mounting plate and loosen them, as shown in

Figure #1. Route the wires from the bottom of the

fan through the hole in the center of the light ﬁ xture.

Then place the three key holes over the three screws

and rotate the light ﬁ xture clockwise, as shown in

Figure #2. Tighten the three screws with the provided

screwdriver.

LOOSEN

SCREWS

SCREWS IN

KEY HOLES

Phillips

Screwdriver

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Casablanca WHITMAN Manuel du propriétaire Page 10